Looking for:
- Curvature tool adobe illustrator cs6 free- Curvature tool adobe illustrator cs6 free
Stroke types M. Angle N. Aspect Ratio O. Delete Stop P. Opacity Q. Location R. Fill or stroke with color S. Color Stop T. Spread U. Freeform gradient V. Freeform gradient modes. The Gradient tool and the Gradient panel have many options common between them. However, there are some tasks that you can perform only with the tool or the panel.
Using the Gradient tool and the panel, you can specify multiple color stops, their location, and spread. You can also specify the angle at which colors display, the aspect ratio of an elliptical gradient, and the opacity of each color. You can enable the Real-Time Drawing and Editing feature to enhance the live appearance of objects when you work on them. To enable this feature:. For the linear and radial gradient types, when you click the Gradient tool in the toolbar, Gradient Annotator appears in the object.
Gradient Annotator is a slider that shows a starting point, an end point, a midpoint, and two color stops for the starting and end points. Gradient Annotator B. Dotted ring C. Point to change aspect ratio D. Rotation cursor E. Point to resize radial gradient F. End point arrow point G. Selected color stop J. Origin point. You can use Gradient Annotator to modify the angle, location, and spread of a linear gradient; and the focal point, origin, and spread of a radial gradient.
Once the gradient annotator appears in the object, you can either use the Gradient panel or Gradient Annotator to add new color stops, specify new colors for individual color stops, change opacity settings, and drag color stops to new locations.
In linear and radial gradient annotators, dragging the circular end starting point of the gradient slider repositions the origin of the gradient and dragging the arrow end end point increases or decreases the range of the gradient. If you place the pointer over the end point, a rotation cursor appears that you can use to change the angle of the gradient.
Note : Freeform gradient lets you place color stops anywhere in the object. Therefore, Freeform gradient does not require a Gradient Annotator.
When you click the Gradient tool to apply a gradient for the first time, the White, Black gradient is applied by default. If you had applied the gradient previously, the last used gradient is applied on the object by default. Illustrator also provides a predefined set of gradients that you can set using the Gradient panel or the Swatches panel.
In addition, you can create a gradient and save it in the Swatches panel for future use. To apply a predefined or a saved gradient from the Gradient panel:. Based on your requirements, you can choose to apply a linear, radial, and freeform gradient to your artwork. To copy a freeform gradient from one object to another, use the Color Picker tool in the toolbar.
You can set the spread of a color stop in the points freeform gradient. Spread is the circular area around the color stop in which a gradient is to be applied.
To set the spread of a color stop, select the color stop and do one of the following:. Note : You can also drag the line segments and join them together if you want. When you apply a gradient, the default experience is applied on the selected object. This option is disabled for the Windows bit machine. You can modify the color, origin, opacity, location, and angle of a gradient from the Gradient tool, Gradient panel, Control panel, and Properties panel.
To directly enter into the gradient editing mode from the Gradient panel, select the object and click the Edit Gradient button. You can then edit the options, such as color stops, color, angle, opacity, location, aspect ratio, etc. Shades of the same color B. Two different colors C. Modified angle D. Resized annotator E. Changed location. Two different colors B. Changed origin within the dotted ring C.
Changed location of Gradient Annotator D. Changed aspect ratio E. Changed mid-point location. Note : When you select a color stop for gradient, the Control panel and the toolbar show options for modifying color stops. In addition, the color options are displayed on the Color tab to the right.
Color stop B. Spread C. Opacity D. Color E. Swatches F. Color Picker G. Swatch colors. Note : Gradient Annotator cannot be resized with the starting point origin. To reverse the colors in the gradient, click Reverse Gradient in the Gradient panel. If you want to create a single, multicolored object on which colors can flow in different directions use a mesh object.
For details, see Meshes. Legal Notices Online Privacy Policy. Adobe Illustrator Features What's New. Buy now. User Guide Cancel. Learn how to create gradients of different types in Illustrator. Gradient types. In Illustrator, you can create the following three types of gradients: Linear Use this gradient type to blend colors from one point to another in a straight line.
Radial Use this gradient type to blend colors from one point to another point in a circular pattern. Freeform Use this gradient type to create a graduated blend of color stops within a shape in an ordered or random sequence such that the blending appears smooth and natural. Freeform gradient can be applied in two modes: Points : Use this mode to shade the area around a color stop. Lines : Use this mode to shade the area around a line.
Gradient tool and Gradient panel. To open the Gradient tool, click Gradient Tool in the toolbox. Double-click the Gradient tool in the toolbar. The Gradient panel is displayed on the canvas.
Gradient Annotator. Apply a predefined gradient. To apply a predefined or a saved gradient from the Gradient panel: Select the object on the canvas and click the Gradient drop-down in the Gradient panel. In the Swatches panel, click the drop-down in the upper-right corner. Create and apply linear, radial, and freeform gradients. Create and apply a linear gradient Create and apply a radial gradient Create and apply a freeform gradient.
Create and apply a linear gradient. To create a linear gradient, do one of the following: Click the Gradient tool and then click the object on the canvas. The Gradient Type buttons are displayed in the Control panel or Properties panel.
With the object selected, click Linear Gradient to apply the Linear gradient on the object. In the Gradient panel, click Linear Gradient. In the Properties panel, click Linear Gradient in the Gradient section. Create and apply a radial gradient. To create or apply a radial gradient, do one of the following: Click the Gradient tool and then click the object on the canvas.
With the object selected, click Radial Gradient to apply the Radial gradient on the object. In the Gradient panel, click Radial Gradient. In the Properties panel, click Radial Gradient in the Gradient section.
Create and apply a freeform gradient. To create and apply a freeform gradient, do one of the following: Click the Gradient tool and then click the object on the canvas. With the object selected, click Freeform Gradient to apply the Freeform gradient on the object.
In the Gradient panel, click Freeform Gradient. In the Properties panel, click Freeform Gradient in the Gradient section. After you click Freeform gradient, the following two options are available: Points : Select this option if you want to create color stops as independent points in the object.
Lines : Select this option if you want to create color stops over a line segment in the object. Tool available in the toolbar G. Tool available in the drawer. To learn about the tools, see Tools in Illustrator. You can customize a toolbar by moving tools between the toolbar and the drawer. You can add more tools from the drawer to the toolbar or remove tools from the toolbar. The tools can be added, removed, or rearranged in the toolbar only when the drawer is open.
The toolbar is locked for editing when the drawer is closed. You can add one tool or multiple tools together as a group from the All tools drawer to the toolbar. To remove a tool from the toolbar, drag the tool from the toolbar and drop it anywhere in the drawer.
The tool is automatically added to the category to which it belongs. Adding a tool as a group on the toolbar B. Adding a tool separately on the toolbar. You can select multiple tools from the drawer, irrespective of the categories they belong to and add them as one tool group in the toolbar. Similarly, to remove multiple tools together, you can select them using the Shift key and drag them from the toolbar to the drawer.
Adding multiple tools as a group within a tool on the toolbar B. Adding multiple tools in a separate group on the toolbar. Hold down Alt Windows or Option macOS , and then click a tool to cycle through and select tools in the group. Press the keyboard shortcut of a tool. The keyboard shortcut is displayed in the tool tip and the All Tools drawer. For example, you can select the Move tool by pressing the V key. If you install any third-party tools, by default they are shown on the toolbar.
If you have added more custom toolbars, the third-party tools are available in their drawers. You can show or hide the following controls on the toolbar by selecting their icons in the Show section displayed at the bottom of the drawer:.
Click the icons at the bottom of the toolbar to change the drawing mode from Draw Normal to Draw Behind or Draw Inside. Additionally, you can also change the screen mode by clicking the Change Screen Mode icon at the bottom of the toolbar and choosing the desired screen mode.
To switch to the Advanced toolbar, which is a full-fledged toolbar including all the tools, do one of the following:. After you provide a name and click OK , a blank toolbar is created. Click the Edit Toolbar button to open the drawer and add tools to the toolbar.
You can expand some tools to show tools hidden beneath them. A small triangle at the lower right of the tool icon signals the presence of hidden tools. Hold down the mouse button on the visible tool to view the tools hidden under it. Some tools in the toolbar have options that appear in the Properties panel.
Additionally, you can also double-click a tool in the toolbar to view and change the settings for that tool. Click the double-arrow on the title bar to toggle between the single-column and double-stack view of the toolbar.
Click a tool in the toolbar. Hold down Alt Windows or Option macOS , and then click a tool to cycle through and select hidden tools. The keyboard shortcut is displayed in its tool tip. Each pointer has a different hotspot, where an effect or action begins. With most tools, you can switch to precise cursors, which appear as cross hairs centered on the hotspot, and provide for greater accuracy when working with detailed artwork.
Do one of the following:. A toolbar is persistent in the workspace it is created in. If you change to another workspace and then return to the original workspace, any toolbars created are retained and reopened. Legal Notices Online Privacy Policy. Adobe Illustrator Features What's New. Buy now. User Guide Cancel. Toolbar types. Illustrator provides the following types of toolbar: Basic : This toolbar is displayed by default when Illustrator is launched.
It includes a selective set of tools that you frequently need while working on Illustrator. To view the complete list of tools, click the Edit Toolbar
No comments:
Post a Comment